Heat - Samsung MH026FAEA User Manual

operating basic function
SELECTING OPERATION MODE

Heat

The air conditioner heats as well as cools. Warm your room with this versatile appliance in the
cold of winter.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Heat mode indicator appears on the remote control
display.
The air conditioner operates in Heat mode and warms
your room.
Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry,
Fan and Heat.
3. Set the temperature.
Press the Temp or  button on the remote control
to increase or decrease the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4. Set the fan speed.
Press the Fan  or  button on the remote control to
set the desired fan speed.
If room temperature reaches desired value, heating will
stop for a while.
• Each time you press the Fan  or  button, fan
speed will change in order of Auto,Low, Medium
and High.
• Fan may not operate for about 3~5 minutes at the
beginning to prevent any cold blasts while the air
conditioner is warming up.
• Air flow can be adjusted manually (see page 19 for instructions).
• Since the air conditioner heats the room by taking heat energy from outdoor air, the
heating capacity may decrease when outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the
air conditioner heats insufficiently.
18_ operating
FJM Vivaldi_IB_E_31202A_10.27.09.indd 18
button on the remote control.
2009-10-27 16:35:52