Operating Basic Function; Turning The Air Conditioner On And Off; Selecting Operation Mode; Auto - Samsung MH026FAEA User Manual

operating basic function

TURNING THE AIR CONDITIONER ON AND OFF

Press the Power
You will hear a ringing sound and the air flow blade will move up and
down automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving
and remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the Power
air conditioner.

SELECTING OPERATION MODE

Auto

In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Auto mode and Auto fan speed indicator appear on the
remote control display.
The air conditioner will automatically set the operation
mode to Cool or Heat depends on the room temperature.
Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry,
Fan and Heat.
3. Adjust the temperature (if you need to increase or
decrease the room temperature).
Press the Temp or button on the remote control
to increase or decrease the desired temperature.
You can set the desired temperature between the
range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
• While you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
• Air flow can be adjusted manually (see page 19 for instructions).
14_ operating
FJM Vivaldi_IB_E_31202A_10.27.09.indd 14
button on the remote control.
button on the remote control.
button on the right bottom side of the
2009-10-27 16:35:28