Selecting Energy Saving Mode
You can save energy even during operation in the Cool and Heat
mode. In the Cool mode, the temperature will rise and in the Heat
mode, the temperature will fall, resulting in saving energy.
1
If necessary, press the
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
Press the
button.
Result:
The indoor unit beeps.
The air conditioner runs in the Energy Saving mode.
The outer air flow blade moves up and down.
To stop the Energy Saving mode, press the
N N
N N
o o
o o
t t
t t
e e
e e
You can select the Energy Saving mode in the Cool and
Heat mode.
3
To adjust the temperature, press the
until the required temperature is displayed.
4
To select the fan speed, press the
the required setting is displayed.
5
To control the direction of the air flow, refer to pages 16 and 17.
button.
button one or more times
button one or more times until
again.
15
E-