Panel Sentuh - Dell Latitude 3400 Service Manual

Next steps
1. Replace the hard drive
NOTE: Required for systems with 42 Whr battery
2. Replace the battery.
3. Replace the base cover.
4. Replace the SD memory
5. Follow the procedure in

Panel sentuh

Removing the touchpad assembly
Prerequisites
NOTE: For information only, touchpad is included with the palmrest assembly.
1. Follow the procedure in
2. Remove the SD memory
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the three (M2x2) screws that secure the touchpad bracket to the palmrest and keyboard assembly [1].
2. Lift the touchpad bracket off the palmrest and keyboard assembly [2], and peel the tape that secures the bracket to the palmrest.
3. Open the latch and disconnect the touchpad cable from the system board [1].
4. Peel the tape that secures the touchpad to the palmrest and keyboard assembly [2].
30 Melepaskan dan memasang komponen
assembly.
card.
after working inside your computer.
before working inside your
card.
computer.