Bosch Professional GDS 24 Original Instructions Manual page 11

Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Impact driver
Article number
Rated power input
Power output
No-load speed
Maximum torque, hard/soft screwdriving ap-
plication according to ISO 5393
Right/left rotation
Screw diameter
Tool holder
Weight according to EPTA-Procedure
01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K determined according to EN 62841-2-2:
h
Bosch Power Tools
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Suspension eye
(2) Auxiliary handle
(3) Threaded bushing for auxiliary handle
(4) On/off switch
(5) Rotational direction switch
(6) Tool holder
A)
(7) Application tool
(8) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GDS 24
0 601 434 1..
W
W
rpm 1260
Nm 600/300
kg
GDS 24
0 601 434 1..
dB(A)
dB(A)
dB
English | 11
GDS 30
0 601 435 1..
800 920
400 500
1260
1000/500
●
M24 M30
■ ¾" ■ 1"
5.7
/ II
GDS 30
0 601 435 1..
95
106 110
3
1 609 92A 4R3 | (28.02.2019)
●
7.3
/ II
99
3