Connection And Setup - Aiwa AW-LED40X6FL Operation Manual

Connection and setup

Before the installation and use, please read carefully the relevant content in "Warning
and Safety instructions".
HDMI: Support AV devices with an HDMI connector (such as set top box, DVD player,
digital TV set, etc.).HDMI is also called as high definition multimedia interface, and it
can transmit digital audio and video signal with one cable.
NOTE:
 HDMI 1 (supports ARC function)
ARC: (Audio Return Channel) Adopted in TV output of digital audio, can be connected
to the device supporting ARC, transmit the TV sound to the device.
ANT:
Used to connect the antenna and receive signals of the external antenna.
AV : Connect an AV device that has composite video jacks, such as a VCR or a DVD
player
: Connect it to your headphone or other audio equipment.
USB: Connect a USB Storage device and multimedia file playback.
DIGITAL AUDIO OUT: Sending the TV's digital audio signal to external audio equipment
via the
Digital Audio Output port.
:
Short press to turn on the TV, then short press to open the Source Menu,
Long press to turn off the TV.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz; Do not connect the
※
TV power input port with the power cable out of the above range.
※ Before connecting to an external device, please firstly make sure that the TV set and
the external device have been turned off. When connecting, please make reference
to the interface name and the interface colour to connect the signal cable.
※ Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch the metallic part of the cable.
Connection Installation
9