Table of Contents
Advertisement
Available languages
Available languages
10
en
CONNECTIONS
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit.
Your unit is ready to be connected to a mains voltage of
AMPLIFIER CONNECTION (If required)
Whilst you can listen to your new
turntable using the built in speakers
you may wish to connect it to your
existing Hi Fi system.
Connect the audio plugs to the Line
input on your mixer or amplifier using
an RCA cable (not supplied).
Red plug into R/H channel input.
-
-
White plug into L/H channel input.
5V DC
adaptor.
USB AND SD/TF CARD
Connect a USB flash drive or a SD/TF
card reader with MP3 music files to
the turntable's aside
USB
or
SD/MMC
port.
CARD
Then press the
button, the
MODE/REC
first recoding song will play.
QUICK PLAY FLASH
will scan through
the drive's folders for playable music files
in the following order:
1.
Songs recorded by the turntable
that are located in the "RECORD0"
folder (REC0000, REC00001,
REC00003...).
2.
Songs in the root directory.
3.
Songs in other folders/subfolders
(including any hidden or .Trash folders).
Note if there's no recorded files, the
playing sequence on the turntable is
based on the alphabetical order.
If the file name has numbers at the
beginning for e.g: 01, 02 or 03...
The turntable will play 01 file first.
Turn the
knob on
ON/OFF & VOLUME
the turntable to adjust the volume level.
Notes:
•
The USB flash drive or SD/TF card
should be formatted as FAT32 format
on your computer before their use.
•
It is advisable to remove unnecessary
files and the file catalog in order to read
faster and reduce reading error when
playing songs.
FUNCTIONS
PLAYING A RECORD
Place the record of your choice on the
1.
turntable. If required, do not forget to
place the adaptor on the record spindle.
2.
Choose the desired playing speed using
the speed selection switch between
33
1/3
,
45
and
78 RPM
.
3.
Turn
ON
the
ON/OFF & VOLUME
knob.
Note that this also controls volume.
Release the tonearm lock.
4.
5.
Raise the tonearm with the tonearm lift
lever.
6.
Place the stylus vertically over the first
track of the record, the turntable will
start turning automatically.
Put down the stylus slowly on to the
7.
record to play.
8.
When a record comes to the end the
tonearm is returned to the tone arm rest
automatically.
9.
Replace the protective cap on the stylus
and close the tonearm lock.
Turn off power at mains.
10.
Notes:
•
If the duration of a 7 "disc is longer than standard, the arm may automatically rise and return
before the end of playback.
•
The turntable will storage on the USB or SD/TF card the recordings inside a created folder by the
name of
.
RECORD0
RECORDING FUNCTION
Insert a USB flash drive or a SD/TF card
1.
reader to the turntable's aside
or
USB
port.
SD/MMC CARD
2.
Lower tonearm onto the record; the
record will play.
3.
To start recording, press and hold the
MODE/REC
for about 2 seconds; The
beep indicates recording.
When finished, press
for
4.
MODE/REC
about 2 seconds to stop recording.
Twice beep indicates stop, and the song
will be recorded.
5.
When you finished, raise the tonearm
and return it to the arm clip.
DELETE RECORDED MUSIC
You can erase individually every song playing
by keep pressing the
/DEL
button until 2
seconds.
Twice beep indicates that the file has been
removed properly.
(Note that the USB original documents can be
removed too).
FM FUNCTION
Briefly press the
MODE/REC
button until
you reach the
FM RADIO
function.
Press
/DEL
button for searching once
finished searching it will play the first
radio station.
Switch channels, by pressing
and
on
the unit to choose your favorite station.
11
Hide quick links:
Advertisement
Table of Contents
