Installation In The Cabinet; Power Connection; Installation And Maintenance; Technical Specifications - Samsung PKG001 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Installation & Maintenance

Safety instructions for the installation

This oven may be installed only by an approved electrician. The installer is responsible for

connecting the appliance to the mains and in so doing for observing the relevant safety

regulations.

● Ensure protection from live parts when installing the oven.

● The kitchen cabinet in which the oven is built in must satisfy stability requirements as

speciﬁed in DIN 68930.

Technical Speciﬁcations

Input voltage / frequency

Volume (usable capacity)

Output rating

Net weight

Weight with packaging

Housing (W x H x D)

Oven interior (W x H x D)

Power Connection

If the appliance is not connected to the mains with a plug,

a multi-pole isolator switch (with at least 3 mm contact

spacing) must be provided in order to satisfy safety

regulations. The power cable (H05 RR-F or H05 VV-F, min.

1.5 m, 1.5 ~ 2.5 mm²) must be of sufﬁcient length to be

connected to the oven, even if the oven stands on the ﬂoor

in front of its built-in cabinet. Open the rear connection

cover of the oven with a screwdriver and loosen the screws

of the cable clamp before you connect the power lines to

the relevant connection terminals. The oven is earthed

via the (

)-terminal. If the oven is connected to the

mains with a plug, this plug must remain accessible after

the oven is installed. Samsung will take no responsibility

for accidents that originate from a missing or faulty earth

connection.