R
epair
< 1 > Lubrication
Apply MAKITA grease N. No.2 (total 5.0g) to the teeth of the gears designated by black triangle in order to
protect parts and product from unusual abrasion. See Fig. 1.
Fig. 1
Spur gear 46
Gear complete 9-58
< 2 > Removing drill chuck
1. Remove battery cartridge from the machine.
2. Open the jaws of drill chuck fully and remove pan head screw M5x22 by turning it clockwise. See Fig. 2.
If it is difficult to remove M5x22 pan head screw using screwdriver, use Impact driver of electric power tool.
3. Hold hex wrench with drill chuck firmly and next hit the hex wrench with plastic hammer as illustrated in Fig. 3.
Then drill chuck can be removed from spindle.
Fig. 2
Pan head screw M5x22
DC motor
Fig. 3
P 2 / 5
Hex wrench
Plastic hammer