Motorola HAD4021A Installation Manual page 8

6
9. Refer to
Be sure that all of the cable has been pulled through to the radio. The threaded portion of the
bushing assembly will not fall through the mounting hole.
C a u t i o n
10. Refer to
.
11. When the nut is well onto the bushing assembly, pull upward on the entire assembly as
shown in
Make sure the bushing assembly is centered in the hole and seated properly with both
shoulders inside the mounting hole.
Figure 3. Insert the bushing assembly into the mounting hole as shown, tilted slightly.
In double-roof vehicles, which have no dome light, DO NOT
attempt to secure the base mount to both roof layers. Secure
it to the top, outer roof layer only.
Figure 3. Inserting the Bushing Assembly
Figure 4. While holding the bushing assembly down, thread the locking nut onto it.
Figure 4. Threading the Locking Nut
Figure 5.
MAEPF-27628-O
MAEPF-27629-O
Installation Procedure