Advertisement
W
iring diagram
Fig. D-3
Connect connectors for Field lead wires
to Switch terminals of Handle set (L) side
while facing their Wire connecting portions
to Motor housing side.
Fig. D-4
Put Lead wire (black or brown)
between Ribs A and B.
Put Noise suppressor's Lead wire
(white) and Field Lead wire (black)
between Ribs A and C.
Power supply cord
Wiring to Switch
Connect Noise suppressor's lead wires to Switch terminal
from the same direction as Field lead wires while facing
their wire connecting portions to Handle set(L) side.
Note: Noise suppressor is not used for some countries.
Wiring in Handle Set (L)
Put the slag portion of Field lead wires in this position.
Note: The slag portion can be also put in the space for
Do not put Noise suppressor's
Lead wires (2 whites) on
Field Lead wires (2 blacks).
Rib C
Rib A
Rib B
Switch
Pass Field lead wires (2 blacks)
through the groove.
Do not slag Field lead wires
(2 blacks) in Motor housing.
Field lead wire
Noise suppressor
Noise suppressor if it is not used.
P 9/ 9
Noise suppressor
(if it is used)
Advertisement
