Inserting/Removing The Battery - wayscral EVERYWAY E-50 Original Manual

•
the tyre inflation
•
the wind
•
the pedalling effort provided
•
setting off and the frequency of stops
•
the outside temperature.
IV.

Inserting/removing the battery

On electric bikes, the battery is located in a case, beneath the luggage
rack.
WARNING: before handling the battery, make sure the
switch is in the off position.
Battery installation: slide the battery into position all the way into the
case. To install the battery, first slide the battery pack horizontally along
the rail, while pressing down on it to make sure it is securely in place,
then lock with the key.
Locking the battery: to lock the battery inside its case and prevent it
from being stolen or lost, insert the key into the lock on the left-hand
side, at seat height, and give it half a turn in a clockwise direction.
Unlock it again with a half-turn anti-clockwise.
WARNING: ensure that the key is removed and kept in a
safe place.
67
EN