wayscral EVERYWAY E-50 Original Manual page 56

•
Position the caliper arms vertically and parallel using the correct
cable tension. Once the cable position has been defined,
tighten the cable with the appropriate screw.
Caliper arms
•
Align the pad with the side of the wheel rim.
•
Adjust the distance between the pads and the wheel rim, from
1 to 3 mm, to increase the efficiency of the braking.
•
Move the back of the pad slightly off the wheel rim.
•
Adjust the symmetry of the calipers by balancing the return
springs of the right and left calipers.
Screw
Driving direction
56
EN