Bang & Olufsen BeoLink NL/ML Installation Manual page 40

Example: A Slave
If customers wants to add a BeoPlay V1 on Network Link. Then it should be connected to the Master Link system through
a BeoLink Converter NL/ML. (See fig. 4).
As both BeoVision 7 (the V Master) and BeoMaster/
BeoSound 5 (the A Master) is retained on the Master
Link, then the BeoLink Converter NL/ML cannot take
neither the A Master or the V Master role. It have to
take the role A Slave, where it will not be able to
distribute any source on Master Link. In the BeoLink
Converter NL/ML menu Sources visible on ML, no
sources can be selected. (See fig. 5).
As both BeoVision 7 (the V Master) and BeoMaster/
BeoSound 5 (the A Master) is present on the Master
Link, then the BeoLink Converter NL/ML can
distribute any source from Master Link to Network
Link. In the BeoLink Converter NL/ML menu
Experience maped to NL, all sources can be
selected. (See fig. 6).
! To avoid echo on audio sources between Network Link and Master Link rooms
an optional delay box can be added.
Library
Technic room
Internet
ISP Router
Network Link
router
NAS
server
Switch
A Slave
V Master
A Master
Appendix
Living room Bedroom
BeoPlay V1
Network Link
BeoVision 7
Master Link
Kitchen
ML V Master
BeoVision 6
Network Link = Green Master Link
Power Link = Yellow
Master Link = Red
BS5
BeoMaster5
ML A Master
Office
IN
OUT
BeoLink Active
NL/ML Delay Box
BeoLink Converter
NL/ML Optional
ML A Slave
Fig. 5 Fig. 6
AV Master
Source Center
A Slave
A Slave
V Master
A Master
40
Fig. 4
V Master
A Master
AV Ma