Bang & Olufsen BeoLink NL/ML Installation Manual page 36

Tools > System Log
The System Log is able to show system messages such as application errors and critical system errors concerning the interaction between the
BeoLink Converter NL/ML and devices connected. The menu can be used to:
- verify the connection to connected devices, errors will be shown.
- check of incoming protocol connections.
! The size of the system log is limited, which means that old message will be deleted
when new messages appear. System log is cleared after reboot. Remember to save
the log before rebooting in case of a problem.
Tools > Report
If a malfunction occurs in the BeoLink Converter NL/ML it is possible to contact Global Service for assistance via the Report menu. A description of
the malfunction can be made and when the save button is pressed the description and a report, with the current configuration of the BeoLink
Converter NL/ML will be transferred to the BeoPortal. The report can be send to the BeoPortal via the Internet or it can be stored on a computer, if
the computer is connected to the Network Link Router or directly to the BeoLink Converter NL/ML.
BeoLink Converter NL/ML (additional menus) 36