Advertisement
A. Flash Mount
C. Flash Mount Rotating Arm
D. Fold Away Kick Stand
F. Arca Compatible Bracket Plate
w/ 1/4-20 Mounting Screw
#PBX3, Universal Bracket Plate (Shown)
** Custom Bracket Plates Available **
1.
Mount the #PBX3 Universal Bracket Plate or custom plate (F) to your camera
body using the captive 1/4-20 screw with the supplied 5/32 hex wrench.
2.
Attach the Boomerang Flash Bracket to th e #PBX3 Universal Bracket Plate
or custom plate by aligning the hardened steel guide pins on the Boomerang
Bottom Arc portion with the mating holes on the Bracket Plate. Next, tighten the
Quick Release Thumb Screw (G) un til b oth parts are ti ght an d fl ush .
3.
To connect or remove the Boomerang Flash Arm from the Arc Base loosen the
knob on the clamp mounted to the Arc (H). Slide the Flash Arm into the clamp.
Tighten the spring clamp. Rotate the arm in the clamp for storage.
4.
Mount your flash cord or cold shoe to the Flash Mount (A) and mount your flash.
5.
To rotate the flash, we recommend using your left hand and reach across the lens
to squeeze the Locking Lever (B) . Th i s w i l l a l l o w yo u to rotate the arm 90˚
degrees while holding your camera securily in your right hand.
Assembly video: https://youtu.be/sqk0oDyehx8 or visit YouTube and Search: BBGv2-PBX3 ProMediaGear Boomerang Flash Bracket Assembly
Instructions
G. Quick Release Thumb Screw
Releases Flash Arm from the Arca
Compatible Bracket Plate
B. Locking Lever
E. Magnetic 5/32" Wrench Pocket
H. Distance Adjustment
and Folding Mechanism
I. 1/4-20 Threaded Adapter
Mount Additional Accessories
Advertisement
