Advertisement
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS
Attach the handle bars by placing them into the appropriate sockets
and twisting them in the correct direction.
NOTE: If the handlebars do not attach flush to the frame, you may need
to shift the location of your throttle and brake assembly appropriately.
Tighten or loosen the throttle and brake assembly with the included hex key
and make sure they are NOT touching or blocking your handlebars.
Some parts of your Hover-1 Aviator can injure you if mishandled.
Moving and folding parts can cut skin. Clamps and pivoting parts
such as brake levers can pinch. When folding and unfolding your
Hover-1 Aviator, Please watch for pinch points where possible injury
may be sustained. Do not leave your hand in these areas during
folding or unfolding.
Advertisement
