Listening To The Radio - Sony DSX-M80 Operating Instructions Manual

Help Guide
Marine Audio
DSX-M80

Listening to the Radio

Make sure that the tuning step is properly set according to your area/region.
Press SRC (source) to select [RADIO].
To preset stations automatically (BTM)
1.
Press MODE to change the band*.
2.
Press MENU, rotate the control dial to select [GENERAL], then press it.
3.
Rotate the control dial to select [BTM], then press it.
The unit presets stations in order of frequency on the number buttons.
*
The following bands can be selected: FM1, FM2, FM3, AM1, AM2.
To tune to a station
1.
Press MODE to change the band*.
2.
Perform tuning.
To tune manually
Press and hold
repeatedly to finely adjust to the desired frequency.
To tune automatically
Press / (SEEK –/+).
Scanning stops when the unit receives a station.
*
The following bands can be selected: FM1, FM2, FM3, AM1, AM2.
To preset a station
While receiving the station that you want to preset, press and hold a number button (1 to 6) until [MEM] appears.
To receive preset stations
Select the band, then press a number button (1 to 6).
Related Topic
Switching the FM/AM Tuning Step
General Setup (GENERAL)
/ (SEEK –/+) to locate the approximate frequency, then press
5-006-644-11(1) Copyright 2019 Sony Corporation
23
/ (SEEK –/+)