Windows 2000 Professional - B&B Electronics 3PCIOSD2A Manual

Windows 2000 Professional

This section covers device driver installation for
Windows 2000 Professional.
1. Configure each port on the PCI card to the desired RS-
232/422/485 mode using the jumpers for Port 1 and Port 2.
2. Install the card in the slot, start the computer as an Administrator
or ask your system administrator to install the software.
3. Windows will detect the PCI card and start Found New
Hardware Wizard, to begin driver installation. When installation
is complete, Windows will set the hardware addressing &
interrupt using the drivers and the Plug and Play function of the
Operating System.
4. After the driver for the PCI Serial Card installs, the serial driver
for the Com port will be installed once for each port on the card.
5. Click Next to continue.
Documentation Number 3PCIOSD2x-3903 Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Chapter 3 25