How It Works - Delta 72045T Series Quick Start Manual

How It Works

Changing the Amount of Soap
The dispenser is designed so that when
you grab the spout it should not activate.
A tap will give you a factory set amount
of soap. To modify the amount of soap
delivered, follow the sequence of steps
below. The factory setting is equivalent to
3 taps. So to reduce the amount delivered,
tap 1 or 2 times once in program mode. To
increase the amount delivered, tap 4 or 5
times once in program mode.
Grab the spout for 5 seconds.
You will see a solid purple light.
Let go of the spout.
Tap 1-5 times for the amount of soap
you want.
The blue light flashes the number of
times you selected (ie: 1-5 times).
It will return to a solid purple light.
If a different
amount is
desired, re-tap
within 5 seconds.
Your soap dispenser will dispense
the same amount with
Touch & Hands-free activation.
The purple light
will turn off 5
seconds after
last flash.
Your settings
have been
saved.
Disabling Hands-free
The hands-free feature of the sensor will
allow your set amount of liquid to be
dispensed without touching the spout
if you place your hand or a wet sponge
within 1/2 inch anywhere near the spout.
To disable the hands-free mode, follow
the directions below.
Grab the spout for 10 seconds.
The purple light comes on after
5 seconds, but will turn off after
10 Seconds. Let go of the spout when
the light turns off.
You will see a solid red light for
3 Seconds. Hands-free is now off.
To turn hands-free back on, grab the
spout for 10 seconds.
The Purple Light comes on after
5 Seconds, but will turn off after
10 Seconds. Let go of the spout when
the light turns off.
You will see a solid blue light for
3 Seconds. Hands-free is now on.
5