NORAUTO SOUND NS-228 BT Manual page 185

2 Once completed the dialing, [CALLING] is displayed�
To redial number
1 Press on front panel to redial�
2 The unit will display [CALLING], and the unit starts dialing the
number dialed last time�
Remark:
To make an outgoing call on this unit, the bluetooth connection
between the unit and the phone must be active�
Receiving a Call
1 If there is incoming call, the phone number is displayed� If the
incoming call has no phone number, [PHONE IN] is displayed�
2 Press to answer/accept the call�
3 When conversation ends, press
Call Transfer
You can transfer voice from loudspeaker to mobile phones during
call�
During talking, press and hold
to mobile phone�
Bluetooth Audio Streaming A2DP
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored on
the device through the unit� If the device also supports Audio Video
Remote Control Profile (AVRCP) profile, you can use the control on
the unit or its remote control to play music stored on the device�
1 Press SRC repeatedly to select [BT AUDIO]�
2 Press to start play, press it again to pause�
3 To track up/down, press
to terminate the call�
voice transfers from loudspeaker
�
/
184