Factory Default Settings; After Sales Service; Contact In Case Of Malfunction; Warranty - Miele SLQL0 Scout RX2 Operating Instructions Manual

en
For optimum care, store the robot va-
cuum cleaner at half charge capacity
(rechargeable battery status indicator
in the display is orange).

Factory default settings

The robot vacuum cleaner can be reset
to its factory default settings. Have the
remote control to hand.
 Press and hold the Spot and Turbo
sensors on the display for at least 5
seconds at the same time.
r:St will appear in the display.
 Within the next 2 seconds press the
OK button on the remote control.
F:tr will appear in the display.
The robot vacuum cleaner will start
again with its factory default settings re-
stored.
64

After sales service

Contact in case of malfunction

In the event of any faults which you
cannot remedy yourself, please contact
your Miele Dealer or Miele Service.
Contact information for Miele Service
can be found at the end of this docu-
ment.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.

Warranty

The appliance warranty is valid for 2
years from date of purchase. In the UK,
you must activate your cover by calling
0330 160 6640 or registering online at
www.miele.co.uk.
For more information on country spe-
cific warranty terms and conditions,
please contact Miele Customer Service.