Britax BOB B-SAFE E9LT34A Instructions page 2

Chest Clip Kit:
• Chest Clip Assembly
• No Tools Required
Chest Clip Removal
1. Loosen the harness by pressing the harness
adjuster release button and pulling both
harness straps forward (Fig. 1).
2. From the back of the seat, remove the harness
straps from the harness yoke (Fig. 2).
3. Carefully pull both harness straps to the front
of the seat (Fig. 3).
4. Remove the comfort pads from each of the
harness straps (Fig. 4) and set aside for later
replacement.
5. Remove the chest clip from the harness straps
and discard (Fig. 5).
Chest Clip Replacement
1. Route the harness straps through the new
chest clip assembly.
2. Slide the comfort pads onto the harness straps.
3. Ensure that the harness straps are not twisted
and route through the appropriate slots in the
back of the seat (Fig. 6).
4. Secure the harness straps onto the harness
yoke with the appropriate loops (Fig. 7 and 8).
• Inner Loop: For infants weighing less than
11 lbs (5 kg).
• Outer Loop: For infants weighing over
11 lbs (5 kg).
5. The installation is now complete and your infant
car seat is ready to use.
Video Instructions:
www.bsafe35clip.com
Co nsume r S er v ic es: 1 -8 33 -4 7 4 -7 0 1 6
Page 2 o f 4
B-SAFE
Instructions / Instructions / Instrucciones
1
3
5
23 7
Br itax Child Sa fety , Inc ., 4140 P leas ant Roa d, For t M ill, S C 29 70 8, U. S . A
35 / B-SAFE
® ®
harness yoke
2
4
23 6
Inner Loop
Outer Loop
8
© 2017 Br itax Child Sa fety , In c. A ll rights re se r v ed .
35 ELITE
P 0 84 52 10 0_ A : 06 . 17