Manual revised June 2018 PeakAbout III for SAMpack120-D software version 1.0.6 Printed in U.S.A. WARRANTY Berkeley Nucleonics Corporation warrants all instruments, including component parts, to be free from defects in material and workmanship, under normal use and service for a period of 12 months after delivery to the original buyer only.
Page 3
Perform Background Measurement ..................12 4.3.4 Perform Manual Calibration (Optional)..................13 4.3.5 Begin Monitoring Radiation ..................... 14 4.3.6 When the SAMpack 120-D Has Alarmed ................15 4.3.6.1 Radiation Directionality ....................15 4.3.6.2 Range Finder ........................17 4.3.7 Perform Manual ID ........................17 4.3.8...
Page 4
Spectrum Display Options ....................... 53 Loading and Analyzing Event Data ..................... 54 5.4.1 Download Event Data from the SAMpack 120-D PDA to the PC ........... 54 5.4.2 Load Event Data from the PC Database ................. 55 Managing the Isotope Library ...................... 56...
Page 5
Saving Event Data in XML Format (ANSI 42.42) ................ 57 Printing Event Data ........................58 Upgrading PeakID ........................59 CHAPTER 6. USEFUL TIPS AND REMINDERS ..................61 SPECIFICATIONS ............................62 SAMpack 120-D User Manual Page iii SW Ver 1.0.6...
SAMpack 120-D is the Samsung Galaxy J5. The SAMpack 120-D is designed to accommodate two 2 x 2-inch scintillation detectors in order to provide the highest sensitivity, general purpose isotope identification, and 24 solid-state neutron detectors (2x2 cm with 30% neutron QE) High resolution detector options are available.
Important Safety Information The SAMpack 120-D has been meticulously engineered to provide safe, dependable, high performance for years. As with any kind of electrical equipment, following instructions and taking basic precautions will prevent harm to the operator and to the equipment.
If in doubt about the compatibility of a device, contact a technician authorized by Berkeley Nucleonics Corporation. SAMpack 120-D CONTAINS FCC ID: U8D-FB155BC-F This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.
Page 9
The label showing the system power requirements and serial number (BSN, lower right corner) is located on the side of the unit (Figure 2.1). Figure 2.1. SAMpack 120-D label INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
CHAPTER 3. SYSTEM DESCRIPTION System Components The SAMpack 120-D physically consists of a detector unit, a PDA (Samsung Galaxy J5 or equivalent), AC and vehicle power adapter/chargers for the detector unit (one AC to 12V DC, and one 12V vehicle adapter/charger), a USB-to- microUSB cable, an unmarked backpack, and a water- and shock-resistant carrying case (Figure 3.1).
Page 11
Please contact Berkeley Nucleonics for the full User Manual Berkeley Nucleonics Corporation info@berkeleynucleonics.com | www.berkeleynucleonics.com 2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858...
Need help?
Do you have a question about the SAMpack 120-D and is the answer not in the manual?
Questions and answers