ABB Totalflow mflo Series Startup Manual page 16

Visual Alarm & Status Codes
µ
After the FLO completes recording Log Period flow and operational
records, the LCD will show any alarm conditions that have occurred.
Also, the date, hour and type of alarm conditions are stored in the
µ
FLO's memory. Status codes are also displayed when the conditions
exist. An alarm or status code can be a character, letter or symbol. The
alarm and status codes shown in Table 1 will appear on the right side of
the LCD screen; see illustration below. Descriptions of each code are
described in Table 1.
Note: Applications in
annunciator.
Annunciators under Display in PCCU32's Entry Mode. (See
Figure 11)
Table 1
16
Figure 10 (Annunciator Locations)
µ
FLO Series devices can be assigned to any
To verify
Figure 11 (Annunciator Assignments)
Alarm & Status - Codes and Description
the current assignments, see