Britax Marathon E9L06 Replacement Instructions

Adjuster Strap
Replacement Instructions
for Marathon & Wizard
™
Items required:
-Scissors
-New adjuster strap
1
Cut old adjuster strap.
5
Attach shoulder straps to yoke on
new adjuster strap.
IMPORTANT: Attachment must be
exactly as shown in photo for correct
alignment. White tab must be toward seat.
Overview: Front
™
2
Completely loosen shoulder straps by
lifting the adjuster lever while pulling
the harness straps forward.
WIZARD ONLY:
before proceeding.
6
Drop loose end of adjuster strap
between black belt guide and rear of
seat.
Fully raise headrest
Overview: Rear
3
From rear of seat, pull straps up to
remove yoke from behind belt guard,
then slide both shoulder straps off metal
yoke.
4
Discard old adjuster strap.
7
Route loose end of adjuster strap over
base to the front.