Updating your NuraLoop Your NuraLoop Charging your NuraLoop Checking your NuraLoop’s battery Using your NuraLoop’s TouchDials Making and receiving voice calls with your NuraLoop Connecting cables to your NuraLoop Connecting your NuraLoop to other products Computers Aeroplane adaptors Changing your NuraLoop’s ear tips...
Page 3
85 Decibels (dB) or above (approximately the same volume as a food blender) can cause gradual hearing loss. Due to the clarity and noise canceling of the NuraLoop, you won’t need to listen to your music as loudly as with many conventional headphones.
Turning your NuraLoop on/off Your NuraLoop turns on and off automatically when you put it in your ears. Downloading the Nura app To set up your NuraLoop, you’ll need to personalise it via the Nura app. You can download the Nura app from: • iOS — the App Store • Android — Google Play •...
To set up your NuraLoop, you’ll need to connect with Bluetooth. To connect your NuraLoop with Bluetooth: 1. Put on your NuraLoop. When you put on your NuraLoop, it turns on and enters discoverable mode. 2. Open your mobile device’s Settings > Bluetooth. 3. Select NuraLoop XXX.
Your NuraLoop is now personalised. Updating your NuraLoop From time to time, you’ll see a message on the Nura app asking you to update your NuraLoop. You can also check if your NuraLoop needs updating at any time: 1. Open the Nura app.
NuraLoop. • A voice prompt will announce ”battery low” when your NuraLoop needs charging. Using your NuraLoop’s TouchDials The NuraLoop has a TouchDial on each side that you can tap, double tap and dial to perform useful functions. Dial Dial Dial the TouchDials clockwise and anticlockwise to adjust your ANC/Social Mode and volume.
Your NuraLoop comes with an analog cable and a USB-A charging cable. Please note: the NuraLoop analog cable is designed to be worn behind your head. Do not attempt to disconnect the cable that runs between the two ear buds. This cable is not detachable.
— The analog cable cannot be used when your NuraLoop’s battery is not charged. — The NuraLoop USB-A charging cable (comes included) is charging only. You cannot listen to audio with the USB-A cable. — The NuraLoop’s personalised sound works no matter how you connect — wireless or wired.
5. Select NuraLoop XXX. XXX is your NuraLoop’s unique pairing number. Alternatively, you can connect your NuraLoop to a PC or Mac with the NuraLoop analog cable. Please note: the NuraLoop’s microphones cannot be used when connected via analog cable.
Please note: never use alcohol, cleaning solvents or strong detergents when cleaning the NuraLoop. To clean the NuraLoop: 1. Remove the NuraLoop’s ear tips, and wash them with water and a mild detergent. 2. Rinse and dry the ear tips. 3. Reattach the ear tips.
Immersion Social mode Customising your NuraLoop’s TouchDials The NuraLoop has a TouchDial on each side that you can tap and dial to perform useful functions. The left dial controls ANC/ Social Mode and the right side controls the volume. You can customise the tap controls: 1.
Adjusting your Active Noise Cancellation (ANC)/ Social Mode Active Noise Cancellation reduces outside noise so you can focus on your music. Social Mode passes outside sound into your NuraLoop so you can hear conversations and the world around you. To adjust your NuraLoop’s ANC/ Social Mode via the TouchDial or in-app: TouchDial —...
Adding a hearing profile: 1. Open the Nura app. 2. Tap Add Profile on the Nura app homepage. 3. Select either Owner or Another Person. If you own the NuraLoop you’re using, select Owner. If you’re using someone else’s NuraLoop, select Another Person. 5. Follow the app prompts to finish adding your new hearing profile. Deleting a hearing profile: 1.
• Close and reopen the Nura app. • Put on your NuraLoop and disconnect the analog cable/ USB-A charging cable. Your NuraLoop turns on and enters discoverable mode when it is on your head with no cables attached. • Check your NuraLoop is connected to your mobile device with Bluetooth. You need to be connected with Bluetooth to use the Nura app.
• Make sure your NuraLoop’s ear tips are sitting securely in your ears. Fit your NuraLoop correctly: Anything that sits near your ears can break the seal between your ears and your NuraLoop. • Remove any headwear, earrings and other jewellery that sits near your ears.
You are unable to make calls when connected via analog cable. • Check that nothing is blocking your NuraLoop’s microphones. The microphones are located on the right side of your NuraLoop. • Disconnect your NuraLoop from your device and then reconnect.
Resetting your NuraLoop If you’re having trouble with your NuraLoop and are unsure how to proceed: 1. Connect your NuraLoop to the USB-A charging cable. 2. Connect the USB-A charging cable to your computer.
Page 22
This device may be operated in all member states of the EU. Declaration for EU compliance: Operation Frequency Band/Max. RF power transmitted: 2400-2483.5 MHz. Hereby, nura® Operations Pty. Ltd declares that the radio equipment type ‘E00B’ is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.nura.co/nuraloop/compliance...
Page 23
Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. Android, Google Play and the Google Play logo are trademarks of Google Inc. The NuraLoop is designed by nura® in Melbourne, Australia.
Need help?
Do you have a question about the Nuraloop and is the answer not in the manual?
Questions and answers