Download Print this page

Advertisement

Quick Links

Operation Manual
Pond Pump
50298–50300, 50318–50324
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

loading

Summary of Contents for WilTec SUNSUN 50298

  • Page 1 Operation Manual Pond Pump 50298–50300, 50318–50324 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
  • Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
  • Page 3 The appliance must not run dry or with a completely closed intake.  The appliance must not be used for swimming pools.  The device cannot be employed for drinking water circuits.  © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 3 http://www.WilTec.de http://www.aoyue.eu 2020-1...
  • Page 4 To avoid the premature clogging of the filter, position the pump above the pond sludge. Install the supplied filter sponge to keep the pump inlet free. The pump is started by plugging in the mains plug. © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 4 http://www.WilTec.de...
  • Page 5 Is there dirt in the pump housing? > Perform cleaning! Is the hose or the pipe clogged? > Clear the hose/pipe! Is the hose broken, too long? > Check, replace, shorten! © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 5 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 6 Pump construction № Name № Name Motor body Rubber feet Rotor/impeller Filter basket Pump housing © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 6 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 7: Disposal Regulations

    All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
  • Page 8: Eg-Konformitätserklärung

    It has been tested with the following harmonised standards: Il a été testé à partir des normes harmonisées suivantes : EN60335-2-41:2003+A1:2004+A2:2010 EN60335-1:2012+A11:2014 EN62233:2008 Eschweiler, 12. Juli 2016 __________________________ Bernd Wildanger Geschäftsführer © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 8 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 9 Il a été testé à partir des normes harmonisées suivantes : EN 55014-1 :2006+A1 :2009+A2 :2011 EN 55014-2 :1997+A1 :2001+A2 :2008 EN 61000-3-2 :2014 EN 61000-3-3 :2013 Eschweiler, 09. November 2016 __________________________ Bernd Wildanger Geschäftsführer © by WilTec Wildanger Technik GmbH Item 50298–50300, 50318–50324 Page 9 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...