Advertisement
Operation Manual
Pond Pumps
ARTICLE CTP-Series
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 11
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
Related Manuals for WilTec CTP-Series
Summary of Contents for WilTec CTP-Series
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 11 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 prevent consequential damage caused by flooding of rooms in the event of malfunctions of the de- vice. If the device should fail, repair work may only be carried out by a qualified electrician or by WilTec customer service.
-
Page 4: Electrical Connection
230 V~50 Hz socket. Make sure that the socket is sufficiently fused (min. 6A) and in order. Insert the pump plug into the socket so that the pump is ready for operation. © by WilTec Wildanger Technik GmbH Seite 14 http://www.WilTec.de... -
Page 5: Installation
However, for a long service life and uninterrupted operation, we recommend regular inspection and cleaning. In order to ensure proper functioning of the pump, it is necessary to clean it regularly. We recommend a weekly cleaning of the pump. © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu... -
Page 6: Overload Protection
Engine Housing Outlet Screw Filter Basket O-Ring Gasket Outlet Pump Casing Bearing Outlet *Optional: The models CTP-2800 to CTP-8000 are adjustable. The models CTP-10000 to CTP 16000 are not adjustable. © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 7: Maintenance And Cleaning
4) Hold the blue switch firmly and turn the flap on the motor housing in the direction of the arrow. 5) Pull the impeller and pump shaft out of the casing to clean them. 6) Make sure the O-ring is properly reassembled before reassembling the pump. © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu... - Page 8 230VAC ~ 50 Hz 100 W 6.5 m 12000 l/h CTP-14000 230VAC ~ 50 Hz 120 W 7.0 m 14000 l/h CTP-16000 230VAC ~ 50 Hz 140 W 7.5 m 16000 l/h © by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 9: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.