Panasonic VL-SVN511 Quick Start Manual page 2

Model Composition
VL-SVN511
Specifications
Model number and name Main Monitor Station (Main monitor)
Dimensions
(mm)
Power supply unit (VL-PS241)
Power source
Standby:
Power consumption
During operation: Approx. 10 W
Dimensions (H x W x D)
(Excluding protruding sections)
Weight
Ambient temperature: Approx. 0 °C to +40 °C,
Operating environment
Relative humidity (non-condensing): up to 90 %
Display
5-inch, wide colour / WQVGA (480 x 272 pixel)
Display Language
Talking method
Frequency range
Wi-Fi: (IEEE 802.11 b/g/n 2.4 GHz)
Viewing angle
Installation method
Wall mount (mounting bracket supplied)
Minimum illuminance required
Lighting method
IP rating / IK rating
External material
Flame retardant ABS and PS resin
*1 Water resistance is only assured if the Door Station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Installing the Doorphone
Mounting base
Wood screws
Screwdriver
Installing the Main Monitor
Mounting
bracket
Screws
Wire (User supplied)
Installing the Power Supply Unit
Top view
Front view
AC cable
Bottom View
Remove the screw
DC cable
on the cable cover.
Trademarks and registered trademarks
- Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
- iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
- Android is a trademark of Google Inc.
- All other trademarks identified herein are the property of their respective owners.
Important
- Safety Precaution: carefully read the operating instructions and installation manual before using this product.
DISTRIBUTED BY :
VL-MVN511
Door Station (Doorphone)
Up to 2
161
23.5
186
Power supplied by the main monitor
24 V DC, 0.5 A
Approx. 1.8 W
186 x 161 x 23.5 mm
485 g
Ambient temperature: Approx. -15 °C to +55 °C,
Relative humidity (non-condensing): up to 90 %
English, Arabic
Hands-free
Horizontally: Approx. 87°
-
Vertically:
Surface mount (mounting base supplied)
- 1 lx (within approx. 50 cm from the camera lens)
- Warm white LED lights, Infrared LEDs
-
Flame retardant ABS resin
83.5 mm
Wall
Wire
(User supplied)
Mounting
base
Wall
83.5 mm
AC IN connector
DC Cable
25 mm
DC cable DC OUT
7 mm
binder hole terminal
VL-MVN511 x 1, VL-V522L x 1
VL-V522L
Power Supply Unit
99
36.5
131
Input: 220-240 V AC, 0.2 A ( 50 / 60 Hz )
Output: 24 V DC, 0.6 A
-
131 x 99 x 36.5 mm
200 g
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
-
-
-
-
Approx. 66°
Wall mount or attach to DIN rail
*1
IPX3
Flame retardant PC+ABS resin
•Installation Position
99 mm
Side View
24 mm
Centre of
doorphone
131 mm
83.5 mm
1450 mm
Mounting bracket
Main Monitor
Installing the Relay Box
Front view
1 2
R1 R2 R3
From the main monitor
Remove the screw
on the cable cover.
VL-PS241
* indoor use only
100
54
104
Power supplied by the main monitor
-
104 x 100 x 54 mm
215 g
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
-
-
-
-
-
Wall mount or attach to DIN rail
-
-
-
Flame retardant ABS resin
66° Top View
Image range
1810 mm
960 mm
650 mm
500 mm
1160 mm
500 mm
161 mm
86.8 mm
186 mm
83.5 mm
Top view
To the electric lock
Electric lock Cable binder
S1 S2 S3 S4
1 2
terminal hole
button Bottom View
1 2
R1 R2 R3
Main monitor
terminal connector
• The actual product may vary slightly from photograph.
• All pictures of the LCD display are simulated.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
VL-RLY1
Relay Box
78
38
92
-
92 x 78 x 38 mm
130 g
-
-
-
-
-
-
-
-
87°
Cable from the electric lock
25 mm
7 mm
Cable from the main monitor
9 mm
MG-DHPL014EN 1510ITP/ZZZ-BX2