Panasonic VL-SVN511EX Quick Start Manual

Key Features
• Smartphone Connect:
You can use your smartphone or tablet as a sub monitor to respond to visitors and unlock electric locks no matter where you are in the
home. You can also monitor doorphone images when you want to check the door entrance. Maximum of 4 supported smartphones/tablets can be connected.
* The main monitor must be on the same home Wi-Fi network as a smartphone/tablet (with the dedicated app installed).
* It is also necessary to run the dedicated app in order to receive visitor's calls on a smartphone/tablet.
* Compatible mobile devices: iPhone 5 and later and iPad (iOS 7.0 or later) / Android
* Some mobile devices may not be compatible.
* For the latest information about the app and compatible devices, visit the following website. http://panasonic.net/pcc/support/intercom/smartphone/
• E-mail Notification:
The main monitor can send e-mail with a time stamp and image of visitors to e-mail addresses registered in advance, enabling you to
check who has visited when you are outside the house (even when you are overseas).
When commercially available sensors (such as a fire alarm, calling button, etc.) are connected to the main monitor, you can receive notifications.
* To use this function, a main monitor with e-mail sender information registered must be connected to the internet.
* E-mail may not be able to be sent depending on the condition of the network.
• Wi-Fi Connection:
In addition to smartphones/tablets, the main monitor can also wirelessly connect to the Wi-Fi router for easy connections without a cable.
You can configure Wi-Fi settings using a simplified method (called WPS).
• Electric Lock Release Support:
smartphone/tablet, even from the second floor of the house.
• Picture Recording Function:
• Wide-Angle Camera:
Wide-angle lens covers approximately 170 degrees horizontally and 130 degrees vertically.
• Voice Change Function:
This function makes woman's voice (higher keys) sounds like a man's (lower keys).
• Night Vision:
Door Station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night.
Wiring schematic diagram
DOORPHONE 1*
MAIN MONITOR
D1 1
D2 2
D3 3
D4 4
R1 5
R2 6
R3 7
IN1 8
IN2 9
IN3 10
IN4 11
NP
220-240 V AC
Connection device
B
C
for option input
(A contact)
24 V DC
POWER SUPPLY UNIT
NP: Non-polarised
Accessory Information
For the Door Station:
Mounting base × 1, Screw (4 x 12 mm) × 4,
Name plate × 2, Hex wrench × 1
For the Main Monitor Station:
Relay Box and Related Items:
[Locally procured]
– Screws (for mounting base: × 2, for mounting bracket: × 2)
– Power cables (AC/DC cables), wires (for doorphone and other connections)
The gate or door lock can be easily and quickly unlocked with either the main monitor or a mobile device such as a
The Main Monitor records the images of up to 400 (50 visitors, 8 shots per visitor).
DOORPHONE 2*
NP NP
A
D
NP
NP
RELAY BOX
F
Wire type and length
Wiring run
Main monitor – Doorphone
(including lobby station)
Main monitor – Power supply unit
Power supply unit – AC power source
Main monitor – Relay box
Relay box –Electric lock
Main monitor – Connection device for option input (A contact)
Mounting bracket × 1, Cable binder × 1,
Power supply unit (VL-PS240) × 1, Cable binder × 2
Relay box × 1, Cable binder × 1
Video Intercom System
VL-SVN511EX/FX
TM
smartphones and tablets (Android 4.0 or later)
*When you use an additional doorphone, the maximum number of the electric locks that can be connected
to the doorphone depends on the type of doorphone. Consult your dealer for further information.
Electric lock
E
NP
12 V AC/DC
Power
supply
NP
12 V AC/DC
Power
Electric lock
supply
Diameter
φ 0.65 mm
φ 1.0 mm
A
φ 0.5 mm
φ 0.65 mm
B
φ 1.0 mm
φ 1.2 mm - φ 2.0 mm (17 AWG - 12 AWG)
C
φ 0.65 mm
D
φ 1.0 mm
φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG) According to specification of connected device.
*2
E
*2 φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG) According to specification of connected device.
F
Optional Accessories
Door Station
(Doorphone)
CMOS 0.3 M pixels
VL-V555EX/FX
(Surface mount)
*Flash mounting box (VL-MB554EX) is sold separately.
*1 Type: Single-pair cable with outer sheath (jacket)
Conductor: Copper solid
• A certified power supply wiring has to be used with this equipment.
The relevant national installation and/or equipment regulations shall
be considered. A certified power supply wiring not lighter than ordinary
polyvinyl chloride flexible wiring according to IEC 60227 shall be used.
*2 When using an electric lock or a connection device for option input
(A contact), select a device that meets the following guidelines:
• Electric lock connection terminal (S1/S2, S3/S4):
– N/O dry closure contact
– 12 V AC/DC, less than 1 A
• Connection device for option input (A contact) terminal (IN1/IN2/IN3/IN4):
– Input method: No-voltage contact
– Open-circuit voltage between terminals: DC 7 V or less
– Detection definite time: 0.1 second or more
– Short-circuit between terminals: 5 mA or less
– Resistance value: make: 500 Ω or less make, break: 15 KΩ or more
*1
Wire type
Length (Max.)
22 AWG 100 m
18 AWG 130 m
CAT 5 50 m
22 AWG 10 m
18 AWG 20 m
No requirement
22 AWG 100 m
18 AWG 130 m
Door Station
(Doorphone)
CMOS 1.0 M pixels
VL-V554EX/FX
(Surface mount)
VL-V554UEX/FX
(Flash mount)