Table of Contents
Advertisement
troubleshooting
Recording
Symptom
When the screen is exposed to the
direct sunlight during recording, the
screen becomes red or black for
an instant.
During recording, the date/time
does not display.
The beep sound is not heard.
There is a time difference between
the point where you press
Recording start/stop button and
the point where the recorded movie
starts/stops.
The recording stops.
You cannot record a photo image.
•
Do not leave the memory camcorder with the LCD screen exposed to direct
sunlight.
"Date/Time" is set to off. Set the "Date/Time" to on.
•
Set "Beep Sound" to "On".
•
Beep sound is temporally off while recording movies.
•
•
When the AV cable is connected to the memory camcorder, the beep
sound will automatically turn off.
On your camcorder, there may be a slight time delay between the point
•
when you press Recording start/stop button and the actual point where
the recorded movie starts/stops. This is not an error.
•
The internal temperature of your camcorder is unusually high. Turn off your
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
•
camcorder and leave it for about 1 hour in a cool place.
•
Set your memory camcorder to Photo Record mode.
Release the lock on the write-protection tab of the memory card if any.
•
The storage media is full. Use a new memory card or format the storage
•
media.
page 83 Or remove unnecessary images.
Explanation/Solution
page 86
page 102
page 22
page 75
English_113
Advertisement
Table of Contents
