Getting Ready To Start Recording; Inserting/Ejecting A Memory Card (Not Supplied) - Samsung HMX-W200BP User Manual

Getting ready to start recording

INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)

To insert a memory card
1
Turn off the product, then slide and open the Open/Close lever
in the direction of the arrow to open the memory card cover, as
shown in the figure.
2
Insert the memory card into the card slot until it softly clicks.
• Make sure that the brand label portion of the card is facing
left and the product is placed as shown in the figure.
3
Slide and close the Open/Close lever in the direction of the
arrow to close the memory card cover, as show in the figure.
• To avoid the data loss, turn off the product by pressing the Power ( ) button before inserting or ejecting the memory card.
• If you eject the memory card from the product while it is on, the product turns off.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your product supports only micro SD and micro SDHC cards.
The compatibility with the product may vary depending on the manufacturer and the type of memory card.
To eject a memory card
1
Turn off the product, then slide and open the Open/Close lever
in the direction of the arrow to open the memory card cover, as
shown in the figure.
2
Gently push the memory card to eject it.
3
Slide and close the Open/Close lever in the direction of the
arrow to close the memory card cover, as show in the figure.
2
1
29