CARVIN STARJET User Manual

Pool water jet

STARJET™ POOL WATER JET

User Manual

CARVIN® POOL EQUIPMENT | 4000 boul. Casavant Ouest, Saint-Hyacinthe, Québec, Canada, J2S 9E3

Table of Contents

Need help?

Do you have a question about the STARJET and is the answer not in the manual?

Page 2: Installation
We recommend using a 3-way valve with our 4-way manifold to manage the water return to the pool. You can install up to 4 StarJet on a Carvin pool. For the StarJet 4-way manifold (sold separately) connection, use any 1-1/2” PVC SCH40 pipe.
Page 3 Pass the water tubing under the top ledge to the furthest location of a StarJet. STEP 10 If StarGlow lights are already installed on the pool, you can connect StarJet light inline with the StarGlow lights. Refer to StarGlow or Star Series Starter Kit user manual to learn more about how to connect cables to the StarJet.
Page 4: Troubleshooting
Connect the 12-inch tubing with the tubing passed around the pool. STEP 2 Use the flow valves on the manifold to regulate the distance of each StarJet water jet. If more pressure is need open more the 3-way valve by turning the handle in direction of the position 2.
Page 5 Water freezing and winter precipitation can damage some components of the StarJet. If you live in an area where winter is cold, the StarJet must be removed from the pool and stored in a sheltered room at a temperature above freezing. Water tubing needs to be purged.
Page 6: Technical Information
Product within the period set below and when VIF acknowledges that such defects are attributable to faulty material or workmanship at the time of manufacturing, at its discretion VIF will replace or repair with a new part or the CARVIN® equivalent, at no cost to the consumer for parts and labour.