Uncrating Instructions - GF Health Products Hausted 578 Operating Manual

UNCRATING INSTRUCTIONS

IMPORTANT — REPORT ANY
SHIPPING DAMAGE
IMMEDIATELY:
Inform shipper of any damages - leave carton
intact. Leave equipment in the receiving area
until inspection is complete.
CAUTION — POSSIBLE
EQUIPMENT DAMAGE:
The crate contains fragile, expensive medical
equipment. Uncrate and handle carefully
If after uncrating the equipment you find any
damage (no matter how slight), report the
damage to GF Health Products, Inc.
WARNING — PERSONAL INJURY
HAZARD:
When cutting bands, always use tool specifi-
cally designed for that purpose. This will help
avoid personal injuries frequently incurred
when bands are cut and tension is released.
ENVIRONMENTAL CONDITIONS:
Operating
Temperature -
Relavitive Humidity -
Atmospheric Pressure -
Storage and Transport
Temperature -
Relavitive Humidity -
Atmoshperic PressurE -
5°C to +40°C
20% to 90% @ 30°C
700 to 1060 hPa
-10°C to +50°C
20% to 90% @ 30°C
700 to 1060 hPa
IMPORTANT:
Follow each step in the order
shown in these instructions.
UNPACKING INSTRUCTIONS:
Your Hausted equipment has been carefully packed
at our manufacturing plant to ensure safe ship-
ment to your medical facility. There are several
procedures you must follow to put your new equip-
ment in service. These procedures only take a few
minutes to complete and all are required to ensure
proper operation of the equipment.
1. Cut the two bands around the shipping carton.
2. Remove the top half of the carton and cut one
side of the bottom half.
3. Remove the equipment from the carton.
4. Check to see if all features of the equipment
work properly. If all the features work, advance to
step 5. If any of the features do not work properly,
call GF Health Products, Inc. at 678.291.3165.
Note: Although the equipment has been fully
charged prior to shipment, plug the unit into a wall
socket prior to checking any electric features.
5. Clean the equipment using mild detergent to
remove any dirt accumulated during shipment, and
place the equipment into service.
2
2-1