Advertisement
Assigning buttons
Select "Devices/Light" and press the dial
►
button.
The names of the dimmers/switches
are displayed, for example:
If "
" is displayed after a module name, this module has already
I
been assigned to the Hometronic Manager. The process of
assigning or changing module names is described in the operating
instructions of the Hometronic Manager.
Select the corresponding module, in this
►
case "Ceiling light", and press the dial
button.
The red LED
bright. The Teach-in mode is active.
The Hometronic Manager is ready to transmit data via the red LED during
the next 8 minutes. Afterwards the LED on the Hometronic Manager goes
off.
6
for Manual mode at the Hometronic Manager lights up
CEILING LIGHT
MODULE-2
MODULE-3
MODULE-4
CEILING LIGHT
MODULE-2
MODULE-3
MODULE-4
*
*
*
Advertisement
