Assigning buttons
Assigning buttons
1. Notating the button assignment
Decide which Hometronic component is to be controlled by which
►
button.
Note the assignment on the enclosed table label.
►
2. Change to the "Installation" submenu
If the Hometronic is in manual mode*, press the button for
►
automatic/manual mode in order to change to automatic mode.
The yellow LED
The display* shows the standard display
(example):
Press the dial button at the Hometronic
►
Manager.
The cursor* flashes in the lowest line.
Turn the dial button to the right in order
►
to move the cursor to the highest line.
The text of the highest line changes
from "Hometronic" to "Menu":
4
at the Hometronic Manager* lights up.
HOMETRONIC
WE 29.10.1999
No Lifestyle active
LIVING
HOMETRONIC
WE 29.10.1999
No Lifestyle active
LIVING
MENU
WE 29.10.1999
No Lifestyle active
LIVING
11:15
20.0 C
11:15
20.0 C
11:15
20.0 C