Suzuki SV650 Manual page 85

Oil filter wrench
(Part No. 09915-40620)
4. Turn the oil filter 4 counter-
clockwise and remove it with a
Suzuki "cap type" oil filter
wrench or a "strap type" filter
wrench of the proper size.
5. Wipe off the mounting surface
5 on the engine where the
new filter will be seated with a
clean rag.
6. Smear
around the rubber gasket 6 of
the new oil filter.
7. Screw on the new filter by
hand until the filter gasket con-
tacts the mounting surface (a
small resistance will be felt).
NOTICE
Failure to use an oil filter with
the correct design and thread
specifications
your motorcycle's engine.
Be sure to use a genuine
Suzuki oil filter or an equiva-
lent one designed for your
motorcycle.
NOTE: To tighten the oil filter
properly, it is important to accu-
rately identify the position at
which the filter gasket first con-
tacts the mounting surface.
7-20
a little engine
can damage
oil