ECTIVE DC Series Operating Instructions Manual page 26

ECTIVE DC Series
Overload protection: If the total output
current exceeds the capacity indicated on
the battery, the battery overload protection
is automatically triggered Only connect
devices that are suitable for the battery's
capacity
Integrated Solar Charge Controller (PWM):
When the battery is fully charged via solar
power, the solar charge controller switches
to float charging mode
Emergency power supply:
voltage drops below 11 6V, the system
automatically turns off In an emergency,
you can press the corresponding output
switch (S1 to S3) to immediately activate
the emergency power supply
If the voltage is below 10 8V, the battery
will shut down and the emergency power
supply cannot be activated
At a voltage of 12 9V (after sufficient
charging of the battery) the system is once
again ready for operation
When the
24