Advertisement
TROUBLESHOOTING
PROBLEM: LED does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA
PROBLEM: Dolphin does not control spa. LED blinks
SOLUTION: Make sure you are within 15 feet of the spa
8
alkaline batteries (see page 3).
when you press a key, but receiver does
not respond.
and aiming the Dolphin directly at the
receiver.
It is possible that addressing (which is
incompatible with your spa) has been
enabled accidentally. See the Spa
Addressing section for steps on how to
reset the Dolphin. (See page 6.)
Advertisement
