Tool Specifications - Jet JCT-2610 Operations & Parts Manual

Tool specifications

Model number
Stock number
Bore
Piston stroke
Impact rate (blows per minute)
Rivet capacity
Energy per blow @90psi
Average air consumption
Air inlet
Air hose minimum inside diameter
Required air pressure
Vibration value
1
Noise level
Overall length
Handle
Retainer style
Housing material
Required oil
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
JCT-2610
550610
11 in. (279mm)
850
1-1/4 in.
80 lbf•ft
44 CFM
2
14 m/s
25-1/2 in. (279mm)
Air Tool Oil (or ISO VG32/SAE 10W equivalent)
33 lb. (15 kg)
35 lb. (15.9 kg)
JCT-2611
550611
1-3/16 in. (30mm)
8 in. (203mm)
1,140
1-1/8 in.
60 lbf•ft
44 CFM
1/2 in. NPT
1/2 in.
90 psi (6.2 bar)
2
15 m/s
95-100 dB
22-1/2 in. (572mm)
D-style, drop-forged
Jumbo 11X
Steel
30 lb. (14kg)
32 lb. (13.6 kg)
JCT-2612
550612
6 in. (153mm)
1,560
1-1/16 in.
45 lbf•ft
50 CFM
2
15 m/s
20-1/2 in. (522mm)
26 lb. (12 kg)
28 lb. (12.7 kg)
JET 5