Blue Robotics BlueROV2 Software Setup page 13

5/20/2019
Power Sense Module (PSM) Installation
(https://bluerobotics.com/learn/power-sense-module-psm-installation/)
Learn how to install and setup a Power Sense Module on your BlueROV2 or other underwater project!
SOS Leak Sensor Setup
In the Safety tab, select "Pixhawk Aux6" as the leak detector pin, and set the Logic when dry to "Low."
(https://bluerobotics.com/wp-content/uploads/2019/01/sos-software.png?x62571)
To The First Dive!
Your computer setup is now complete! Please see our Operation Manual to nish getting ready for your rst dive!
https://bluerobotics.com/learn/bluerov2-software-setup/
BlueROV2 Software Setup - Blue Robotics


Privacy - Terms
13/16