4. Removal of the Child Car Seat
4.1 3-point vehicle belt
1)
Release the buckle tongue from the vehicle seat
buckle. Unthread 3-point vehicle belt from the child car
seat and allow it to retract.
2)
Remove the child car seat from the vehicle seat.
4.2 3-point vehicle belt + ISOFIX connectors
1)
Release the buckle tongue from the vehicle seat
buckle. Unthread 3-point vehicle belt from the child car
seat and allow it to retract.
2)
Push the ISOFIX Locking Button (06) forward to release
the ISOFIX connectors (05).
09
3)
Remove the child car seat from the vehicle seat.
Press the ISOFIX adjustment button (08) and fold down-
4)
wards the ISOFIX connectors (05) into the recession slots.
04
5. Care and Maintenance
5.1 Removing the child car seat covers
1)
Disassemble the Seat base (04) from the Backrest (02)
by pushing down on the Seat base (04) whilst pushing
the Backrest (02) backwards until the two projecting tabs
on the Back support (02) disconnect with the openings
in the Seat base (04).
11 12 13
GB 10
09
06
10
04
10
05
11
02
04
12
13
02
04
14
Remove the cover from the Backrest (02) by unhooking
2)
the elastic sections around the projection tabs, then
unzip and pull the cover off over the side wings and
remove from the Backrest (02) shell.
3)
Unhook the elastic sections under the shoulder sections
of the Headrest (01), unlock the buttons on covers and
then pull the cover up over the top of the Headrest (01)
shell.
15 16 17
4)
Remove the covers from the Seat base (04) by unlock-
15
ing the buttons on covers and Seat base (04) shell.
5)
The child seat covers can be washed up to 30℃.
Please observe the instructions on the washing label.
16
5.2 Refitting the child car seat covers
Proceed in reverse order of section 5.1 to put on the cover.
17
CAUTION! NEVER use this child car seat without the
covers supplied. Ensure that you ONLY use the original
child car seat covers, as the cover is an integral part
of the child car seat and fulfillment of important
functions.
18
19
14
18
19
GB 02
GB 11
Need help?
Do you have a question about the OSTARA FIX and is the answer not in the manual?