Standard Signal Mode Table - Samsung SyncMaster S27A750D User Manual

10
Specifications

10.3 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture quality
due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade
the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for
the screen size of your product.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank with the power LED on. In such a case, change the settings according
to the following table by referring to the graphics card user manual.
DP
Normal/
3D
Horizontal
Resolution Frequency
(kHz)
1920 x 1080
113.221
100 Hz
1920 x 1080
137.260
120 Hz
Vertical Pixel
Frequency Clock
(Hz) (MHz)
99.930 235.500
119.982 285.500
10 Specifications
Sync Polarity
(H/V)
+ / -
+ / -
75