Eco Light Sensor - Samsung SyncMaster S27A750D User Manual

7
Setup and Reset
Configuring Backlight
1
m
Press [ ] on the product.
2
Press [ ] to move to
3
Press [ ] to move to
4
Press [ ] to move to
Off: Turn off the screen and activate DPMS mode. If
the monitor to detect movement and turn on after it turned off.
Dimming: Reduce the brightness of the screen (still turned on).
5
Press [ ] to move to the option you want and press the [
6
The selected option will be applied.
The optimal working area for
angle (40°).
If there is no user movement, the
If you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor
Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.

7.1.2 Eco Light Sensor

The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the
screen brightness depending on the ambient light intensity.
This option is not available when
This option is not available when
Configuring the Eco Motion Sensor
1
m
Press [ ] on the product.
2
Press [ ] to move to
3
Press [ ] to move to
SETUP&RESET and press [
ECO and press [ ] on the product.
Backlight and press [ ] on the product. The following screen will appear.
ECO
Eco Motion Sensor
Backlight
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Eco Icon Display
Return Move
Eco Motion Sensor
Eco Motion Sensor
or turn the Eco Icon Display
Bright
Eco Saving
SETUP&RESET and press [
ECO and press [ ] on the product.
] on the product.
5 Min
Off
Dimming
Off
Off
Enter
Off is selected, it takes several seconds for
].
is within a certain distance (1m) and atcertain
may fail to detect motion.
Off.
is in Dynamic Contrast mode.
is enabled.
] on the product.
7 Setup and Reset
53