Preset Timing Modes - Samsung SyncMaster 2443FW User Manual

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Display Mode
IBM, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1280 X 800
VESA, 1280 X 960
VESA, 1280 X 1024
VESA, 1440 X 900
VESA, 1680 X 1050
VESA, 2048 X 1152
General
General
Model Name
LCD Panel
Size
Display area
Pixel Pitch
Synchronization
Horizontal
Vertical
Display Color
16.7M
Specifications
Horizontal Vertical Fre-
Frequency quency (Hz)
(kHz)
31.469 59.940
35.156 56.250
37.879 60.317
48.363 60.004
49.702 59.810
60.000 60.000
63.981 60.020
55.469 59.901
65.290 59.954
70.992 59.909
Horizontal Frequency
The time to scan one line connecting the right edge to the
left edge of the screen horizontally is called the Horizontal
Cycle and the inverse number of the Horizontal Cycle is
called the Horizontal Frequency. Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same
image many times per second to display an image to the
user. The frequency of this repetition is called the Vertical
Frequency or Refresh Rate. Unit: Hz
SyncMaster 2443FW
24 inch (61cm)
518.4mm(H) X 324.0mm(V)
0.270mm(H) X 0.270mm(V)
30 ~ 75 kHz
56 ~ 61 Hz
81
Pixel Clock Sync Polarity
(MHz) (H/V)
25.175 -/-
36.000 +/+
40.000 +/+
65.000 -/-
83.500 -/+
108.000 +/+
108.000 +/+
88.750 +/-
146.250 -/+
156.750 +/-