Samsung SyncMaster 242MP Manual page 40

1) Air
2) STD
3) HRC
4) IRC
5) AFN
STD, HRC, IRC, AFN, and Air identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
The TV automatically cycles through all of the available channels and stores
Auto
Program them in memory. This takes about one to two minutes.
In rare cases, "Auto program" may miss a few channels due to weak signals
and the channels may not be added to the channel memory.
Adds or deletes channels from the memory.
Add/Delete
Due to weak signals or an incorrect antenna configuration, some of the
Fine Tune
channels may not be tuned correctly.
Amplifies signals when antenna reception is poor. However, if incoming
LNA
signals are interfering with each other, turn off LNA as it may malfunction.
1) Off
2) On
Setup
Available Mode
OSD Description
Area When you turn the power on of the product for the first time since it released
Configuration from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
: PC / DVI : TV
This product can be used worldwide if area configuration is set
up regardless of broadcasting type.
: AV : S-Video : Component
Play