Table of Contents
Advertisement
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove
the Display Adapter in the "Control Panel → System → Device Administrator" and then reboot the
computer to reinstall the adapter (video) driver.
If problems repeatedly occur,
Q & A
Question
How can I change the frequency?
How can I adjust the resolution?
How can I set the Power Saving
function?
How can I clean the outer case/LCD
Panel?
How can I remove the "USB Monitor
Installation Program" completely?
There is no response when I right-
click "Samsung UbiSunc (P:) (USB
Monitor)" in the "My Computer"
window and click "Eject" in the
displayed menu.
The screen size of the USB monitor
is larger than the actual monitor size.
The screen size of the USB monitor
is smaller than the actual monitor
size. The screen is centered on the
monitor.
I disconnected or turned off my USB
monitor but my PC still displays the
old monitor information in the Display
contact an authorized service
Answer
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the
version of the driver used.
(Refer to the computer or the video card manual for details.)
Windows XP :
Set the resolution in the Control Panel → Appearance and
Themes → Display → Settings.
Windows ME/2000 :
Set the resolution in the Control Panel → Display → Settings.
Contact the video card manufacturer for details.
Windows XP :
Set the resolution in the Control Panel → Appearance and
Themes → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer.
Windows ME/2000 :
Set the resolution in the Control Panel → Display → Screen
Saver.
Set the function in the BIOS-SETUP of the computer.
Refer to the Windows/Computer Manual
Disconnect the power cord and then clean the monitor with a
soft cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let
any water enter the monitor.
1.Click 'Add/Remove Programs' in the 'Control Panel'. A list of
'currently installed programs' is displayed.
2. Select 'Samsung UbiSync Monitor' from the list and click
'Remove'.
Though your USB monitor is recognized as a drive by your PC,
it has been designed so that the context menu usually
displayed when right-clicking on the "My Computer" window
does not work.
If the primary monitor has a high resolution, screens are
expanded beyond the recommended resolution in Clone mode
(USB monitor). (Recommended resolution: 1680x1050)
If the primary monitor has a high resolution, screens are
smaller than the recommended resolution in Clone mode (USB
monitor). (Recommended resolution: 1680x1050)
The deactivated USB monitors are such that the power to them
is turned off or their USB cables are disconnected. To remove
this information, you have to remove the 'Samsung Ubisync
center.
Advertisement
Table of Contents
