Samsung SyncMaster 2263DX User Manual
Hide thumbs
Also See for SyncMaster 2263DX:
- Manual del usuario (101 pages) ,
- User manual (96 pages) ,
- Quick manual (24 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung SyncMaster 2263DX
Summary of Contents for Samsung SyncMaster 2263DX
-
Page 1: Lcd Monitor
SyncMaster 2263DX LCD Monitor User Manual... -
Page 2: Package Contents
Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Manuals Quick Setup Guide Cables D-Sub Cable USB Cable Sold separately DVI Cable... -
Page 3: Initial Settings
Others Cleaning Cloth Note This is only provided for highly polished black products as a product feature. Your Monitor Initial Settings Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the Power button off and on. It will be displayed again. It can be displayed up to three (3) times. - Page 4 Introduction MENU button [MENU/ ] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Customized Key You can customize key assignment for the Custom button according to your pref- erences.
- Page 5 - You can only hear sound from this monitor model if it is connected to a PC via a USB cable. Use this button to decrease the screen brightness for the 7" USB monitor. The LED blinks when the screen brightness is decreased to the minimum or when a screen brightness adjustment is completed.
- Page 6 Introduction POWER POWER Connect the power cord for your monitor to the POWER port on the back of the monitor. HDMI / DVI IN / RGB IN Connect the HDMI terminal at the back of your monitor to the HDMI terminal of your digital out- put device using a HDMI cable.
-
Page 7: Using The Anti-Theft Kensington Lock
Introduction UP (USB upstream port) Connect the USB port of the computer with the USB cable. DOWN (USB downstream port) Connect the and a USB device with the USB cable. To use to connect the Make sure to use the USB cable supplied with this monitor to connect the monitor's and your computer's USB port. - Page 8 Introduction Headphone output terminal Connect a microphone to the MIC terminal. Cable holding ring Fix the cables using the holding ring, as shown in the figure. Note See Connecting Cables for further information regarding cable connections.
-
Page 9: Connecting Cables
Connections Connecting Cables Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. •... -
Page 10: Connecting Using A Hdmi Cable
Connecting Using a HDMI Cable Input devices such as digital DVD are connected to the HDMI terminal of the monitor using the HDMI cable. When all the connections are completed, connect the power cords for the monitor and DVD (or the device connected to the digital output terminal). Select HDMI using the SOURCE button. -
Page 11: Connecting Usb
Note If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot hear sound. Connecting USB Note You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to the USB port of the monitor supports High-Speed Certified USB 2.0. - Page 12 • You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.) • You can run, move, copy or delete the files on the storage device. (Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3 player, etc.) •...
- Page 13 Note For more information on the driver installation and usage of the USB monitor, refer to Restrictions on the 7”USB Monitor . Installing and Using the USB Monitor Engage and fix the USB monitor into the groove of the armrest holder. You can adjust the location of the USB monitor.
-
Page 14: Connecting Headphone
Make sure to use the 7” USB monitor after properly adjusting the angle of its stand. This may cause the center of gravity of the product to change, leading causing the product to fall resulting in damage or a malfunction. When moving a 7”... -
Page 15: Connecting Mic
Connect your headphones to the Headphone connection terminal. Connecting MIC Note You may connect your microphone to the monitor. Connect the microphone cable to the MIC port on the monitor. Using the Stand Monitor Assembly Simple Stand Monitor and Bottom Connections... -
Page 16: Swivel Stand
Swivel stand Using ( ), You can swivel the monitor left and right at an angle of 350° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor, the power cord of cable can be destroyed. - Page 17 Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
-
Page 18: Troubleshooting
Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor. -
Page 19: Check List
noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. Judging the monitor's working condition If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz"... -
Page 20: I Cannot See The On Screen Display
If the display exceeds WSXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message appears for one minute and then disappears. -
Page 21: The Screen Is Out Of Focus Or Osd Cannot Be Adjusted
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. The screen is out of focus or OSD cannot be adjusted. Have you adjusted the resolution or frequency on the monitor? Adjust the resolution and frequency of the video card. -
Page 22: Check The Following Items If There Is Trouble With The Monitor
The screen of the USB monitor freezes. Check the “Hardware acceleration” setting for your USB monitor in the “Display Properties” window. Set the “Hardware acceleration” value to “Full”. For more information on how to configure the settings, click here. Right-click the “Windows Desktop” and click on “Properties”. The “Display Properties”... - Page 23 Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.) If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter in the "Control Panel →...
- Page 24 The deactivated USB monitors are such that the power to them is turned off or their USB cables are disconnected. To remove this information, you have to remove the “Samsung Ubisync Mon- itor” program from “Add/Remove Programs” in the “Control Panel”.