Table of Contents
Advertisement
MATERIAlS PROVIDED
MATERIAlS PROVIDED
• W all-Mount Control
• M ounting Screws
• D rywall Anchors
• R H Setting Label
A self-adhesive label (RH Setting Label) showing recommended RH settings based on outdoor
temperature is provided . The label can be attached to the front of the control to serve as a
guideline and a reminder for the homeowner to adjust the RH setting as outdoor temperature
changes .
lOCATION RECOMMENDATIONS
MOUNT CONTROl
• I n an area the homeowner wants to
monitor and control moisture levels .
• O n an interior wall.
• A pproximately 5' off the floor.
• A t least 18" from an outside wall.
See figure 1 .
fIGURE 1 – Mounting location
61000790B AA Model 65 Humidifier Control Install.indd 3
MATERIAlS NOT PROVIDED
• W ires
• W ire Nuts
DO NOT MOUNT CONTROl
• I n the flow of a supply register.
• B ehind doors, in corners or other dead air spaces.
• I n direct sunlight, near lighting fixtures, or other
appliances that give off heat .
• O n an outside or unconditioned area wall.
• I n stairwells or near outside doors.
• O n a wall with concealed pipes or ductwork.
90-1666
3
10/12/11 9:47 AM
Advertisement
Table of Contents
